SV08 Multiboard Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a Multiboard Tile to the SV08
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 96
- Makes
- 1
- Views
- 1,297
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
V3:
5/13: Added a third design that uses the newer bordered multiboard and multibin panels. Use dual clips to connect 4 8x8 multiboard or 4x4 multibin panels.
V2:
11/22: Added a second design that is thinner. This one is a border of octagons that goes all the way around the side and a 16X16 board can be attached with dual or quad inserts.
V2 works on both the left and right, but the filament tube and sensor cable need to be fed through the holes.
V1:
W.I.P.
I've only tested the left side.
Mounts an 18X18 Multiboard grid onto the panel mounts of the SV08.
Uses M3x6 screws
11/21: Expanded edges and hole diameters.
11/9: Added threads to the bases, shortened the thickness of the base by half a millimeter, and expanded the upper middle mounting hole for easier installation