1 / 2
Hex Thumb Drive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple thumb drive for 1/4" hex bits
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 52
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Simple thumb driver for ¼" hex bits. I designed this to use for installing bottle cages on my bikes. Inspired by the one shown in a Berm Peak video. It works well for light torque bolts. If you really need to bolt something down the plastic might be too weak.
I included two models:
- Magnet version. This model has a slot to glue a 5x2 mm magnet. This holds the bit in place.
- Push fit version. This model had a tighter fit so it should keep the bits in place.
Print in PETG with 0.2 layer height. Use at least 3 perimiters, preferably more. Enable ironing on topmost surface for a nice finish.