1 / 6
Tubeless bike tire booster for cola bottle [ OpenSCAD ] — image 1
1 / 6

Tubeless bike tire booster for cola bottle [ OpenSCAD ]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple 3D printed bottle cap for making tubeless booster out of ~2L soda bottle.

Rating
1 / 5
Likes
25
Downloads
93
Makes
0
Views
913
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Simple 3D printed bottle cap for making tubeless booster out of ~2L soda bottle.

Requires as little additional parts as possible, and they are dirt cheap.

Supports: doesnt require any, print upright, vertically.

Additionals:

  • O-ring made out of old butyle inner tube, see photo
  • PVC hose with internal diameter of about 6 mm, I used one from aliexpress 
  • Suitable tube clamps 
  • Electrial or PTFE tape to improve tube sealing
  • Bike pump with SCHRADER valve
  • Optionally paperclip to clamp hose. Otherwise one can just hold it in hand in tightly bent position

The source in OpenSCAD is provided, so you can easily play with it to optimize for your setup

Note: As always with tubeless boosters,  Remove the tire valve core before use, unlike the photo which is just a setup demonstration

Tags