Wall Sconce Mount Plate
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.52 – €1.85 net (excluding VAT)
For file: Sconce_Mount_Plate_0.2mm_PETG_MINI_1h32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.68 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 1.53 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adjustable surface mount plate for wall sconce lights.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 44
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
General
When we were decorating our kids' bedroom we wanted some reading lights near the beds but didn't want to drill holes in the wall in case we changed our minds later. The wall sconces we bought came with some metal mount plates that are used for mounting them on an electrical box but wouldn't work well for surface mounting on the drywall.
I modeled this plate so that the screw heads are recessed and there is plenty of large surface area to accept 3M command strips for a good bond to the wall.
Usage
We mounted ours with 2 velcro style command strips (seen in the pictures) and they've been holding well for over 3 months with no sagging or issues.
I added the two curved slots so that if you do find the need to mount this to the wall using screws you can set the angle of the sconce to be level even after it's been mounted on the wall.