1 / 4
2.5" drive dual 2510 fan duct — image 1
1 / 4

2.5" drive dual 2510 fan duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A fan duct for 2.5" drives (espeically U.2 ones)

Rating
0 / 5
Likes
1
Downloads
9
Makes
0
Views
78
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

I installed 2 U.2 disks to my tower PC case, which do not have very proper HDD cooling for the 2.5" mounts. So I added this fan duct to the disks.

As my PC case is designed to fit 2x2.5" or 1x3.5" at the same location, I designed this duct to be able to be around the same thick as a 3.5" drive, which leads to its utilization of 2510 fans.

The drive shown in the photos (and installed on my PC) is Intel D4502, and this fan duct is also designed to optimize for this drive, espeically its integrated heatsink. If the drive to be used is 7mm or 9mm thick, maybe adding an extra heatsink below it will be a good practice (not tested at all).

 

BOM:

4 M3x16 (or maybe longer if the installation position originally needs longer screws than M3x4) screws to install the disk with this fan duct at back

8 M2.5 heat inserts

8 M2.5x14 screws (M2.5x12 may work)

Drive and 2 2510 fans

 

My print settings:

Sunlu ABS, X Y scale 100.7%, rotating to get the face installing fans stuck to the plate

Tags