Playmobil Table
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.65 – €0.79 net (excluding VAT)
For file: Playmobil_Tisch_0.2mm_PETG_MK3S_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.72 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 52.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A two-part Playmobil bar table
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 180
- Makes
- 1
- Views
- 687
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My daughter wanted to open a Playmobil bar, but unfortunately had too less tables. So dad had to design something ;-)
It is a two-part print that can be joined together without adhesive (snap fit). Below the table leg I used a support (possibly it works without), the rest is fine without. So far I have printed it in PETG, but it should also work with PLA.