1 / 4
600W Adjustable Buck Converter Housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
no support needed
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you happen to have this buck converter you might find this housing useful. It is designed to be printed without supports. There are openings on the main body so the voltage can be adjusted from and the wires screwed without disassembling. You would need 4pcs M3x5mm spacers/standoffs attached to the converter prior to screwing it to place from the outside. I have glued piece of the wire mesh to the cooler openings, but you could just leave it open.
600W High Power Step-Down Power DC-DC Buck Converter
12-75V To 2.5-50V 25A Adjustable Regulated Power Supply Board