1 / 4
Duet MB 6HC cooling
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer and frame to cool an MB6HC with a 120 mm fan
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model to cool my 6HC mainboard with a 120 mm fan.
The spacers are needed 4 times, I fixed them with countersunk screws M4 x 50 .
The fan can be attached to the frame with the screws usually supplied.
I glued 4 magnets 8 x 3 mm in the corners of the frame, so that it can be mounted and dismounted without tools.
The drilling pattern of the 6HC is not square, so please take this into account when aligning the frame and fan.