Counting matching models…
----for english, please scroll down---- --- moved from MyMiniFactory --- Halter, um einen Duet 3 6HC-Controller in einen Snapmaker J1 einzubauen. Die Duet wird über Luftkanäle mit einem 5015-Radiallüfter von unten gekühlt. Hierzu muß…
The Wingspan Nesting Box is a fantastic organizer, but it does not have specific places to store the Duet tokens from the Asia expansion or the Hummingbird tokens from the Americas expansion. I saw the Wingspan Hummingbird insert for…
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces. Please note - this box does not have space to store a sandtimer Please note - this box does not…
This is a quick mod I came up with to mount a genuine PanelDue 7i to the front of my Voron using the great work done by: Jurii (Thing 4555514) Tactical_Pickle_Gaming (Thing 2896405) LumberjackEngineering (Thing 2799628) driftology (Thing…
A Duet2Wifi borad mount for the Monoprice Mini Delta. Uses the original board's mount holes.
This is an adapter for the original Tevo Little Monster electronic case which supports a Duet3D 2 as well as a Rasperberry 3/4B, Bigtreetech PI /Adapter with a hole size of approx. 58 x 49.5mm. The round recesses serve as cable…
This is a case for a Duet 2 Wifi Controller, made primarily for fitting on a WorkBee CNC machine but it could be used else where. I have added the files for both a left or right hand version so you can mount it either end of the gantry.…
Duet3D 6HC electronics case for Prusa/Pulse D-frame printers. Can be used with or without the large heat sink. [Update 01042025] I have updated the base so that it misses the lower D frame brace on the Pulse XE Designed by myself and…
I made this model to cool my 6HC mainboard with a 120 mm fan. The spacers are needed 4 times, I fixed them with countersunk screws M4 x 50 . The fan can be attached to the frame with the screws usually supplied. I glued 4 magnets 8 x 3 mm…
Sorry, I did not reorient the STL files, orient to print with the flat edges down. This box will hold a Duet 2 Wifi board. An alternate for external antenna is also included, which shortens the opening for the card antenna and adds an 8mm…
This is a slim mounting bracket for a Duet 3 6hc board in combination with a Raspberry Pi 4B or any other SBC for that matter which has the same mounting hole dimensions. There are two versions. The standard Version and one with a little…
Codenames games come with all the parts in plastic bags which does not look very nice and is not comfortable. So I made some inlays for the original boxes to sort the cards and all the rest. On the side of each is a small hole for…
Umgeschrieben für das Duet Original Code https://github.com/FrYakaTKoP/simple-octo-ws2812
Very simple and rudimentary mount frame to screw the Duet Wifi at the position where usually the electronics box on the Atomstack A5 is. Category: DIY
This adapter allows for use of a remote fan to cool your V6 heatsink mounted on a Smart Effector. These two parts allow you to plug in the CPAP hose and direct the air towards the heatsink. The additional mounting points are for Berd Air…
TEFAL DUETTO lids have wide edges, which makes them difficult to store vertically. To solve this, I created hooks on the edges of the drawers, allowing the lids to be placed around the sides of each drawer. Each side hook includes a…
This is a quick design I came up with to mount the LIS3DH from Adafruit to an 40mm axial fan. https://www.adafruit.com/product/2809 Just print it and mount it to your hotend cooling fan using 2-4 M3 screws. You can attach the…
I tested with a v1.0 cheap clone board. I bought a new genuine one to replace the problematic clone board, but have not tested yet. This supports v1.0 to v1.3, we can just choose 4 suitable m3 inserter holes. This needs 4 m3 heat inserts…
A case for the Duet Tool Distribution Board v0.5 (the only version they have as of Jan 2025) that allows the Tool Distribution Board(TDB) to be mounted with M5 screws. The case has a bottom plate that needs M3 heatset inserts. I used the…
Die KOMO DUETT Getreidemühle hat einen Flocker für Hafer- oder andere Flocken. Der Flockgrad ist über ein kleines Verstellrad einstellbar zwischen GROB und FEIN. Bei der Einstellung FEIN neigt das Mahlwerk dazu, sich festzuklemmen, und…
A small discrete insert that fits into the existing plastic tray in the box to hold all the tokens with minimal filament and allowing for vertical storage. My print in the photo is hashed as I print without tops/bottoms/walls to save on…
Stock EVA 3.0 trihorn duct with added mount for SZP duet scanning probe. Print with flange side on bed. May need to paint on some tree supports, but I've printed it fine without any.
Holders, Brackets, for Duet 3 boards. This is a remix from https://www.thingiverse.com/thing:5172438
Duet3D PanelDue 5 Front Mount Just a simple frame mount for the PanelDue 5 touch screen from Duet3D for mounting onto extrusion. Designed in Fusion 360, print flat, 0.2LH, Any. Please leave a “Like”, Thanks for downloading
Duet3D PanelDue 7 Front Mount Frame for mounting the PanelDue 7 in front of your machine. If you can mount extrusion to the front, you can mount this touch screen. Designed in Fusion 360, print flat, 0.2LH, Any. Please leave a “Like”,…
Print in ABS or ASA, ducting is printed standing up, with supports to hold up the FC mounted part. Be careful when sliding it on so you don't knock any surface mount components off. Specifically the small capacitors near the stepper…
Duet3D 6HC enclosure for Prusa/Pulse MK3S+ XE No frills minimal enclosure to fit the 6HC onto the MK3S+ Please leave a “Like” Thank you for downloading.
This is a mount I designed for the Vz_Hextrudort-Low extruder and the Duet RotoToolboard. It's my second attempt as the prototype did not have enough strain relief for the big XT30_2+2 connector that the roto toolboard uses. This version…
This is a remix of https://www.thingiverse.com/thing:1830918 Which was the best Duet box I could find and was one of the very few that put the cooling fan in the right general area (blowing on back of the controller). It also used an 80mm…
Design notes I used two magnets—8 mm (D) × 3 mm (H)—to keep the lid secure, so that the precise fit of the lid is not as important. I printed a lid with only 0.1 mm clearance—which is too tight to fit as-printed—because I preferred to…
This is a Duet Wifi Box it fits the Prusa Mk3s/+ Frame. This is a Remix from Wolfgang Shadows Caribou Duet box Original Design :…
Awkward part for duet tool board on mgn blv cube metal kit.
Remix of: https://www.thingiverse.com/thing:2673206 I like the simple design of the Duet Wifi Case from denos, so I remixed it to use it on my Atomstack A5. Changes on bottom part: Duet position moved to make space for the…
My version of the Z mounted Duet electronics for the screw terminal version of the board. Instructions My supplied Duet with my Think3dPrint3d Mini-Kossel has screw terminals rather than pin headers, so the case created by DC42 didn't…
I designed a case for mounting my duet Wifi on the 3030 extrusions, in my approach the model is simply a box width 3 holes for the screws and some some appertures for the cables. For the print of the picture I used transparent pla for the…
I was looking for a way to add good strain relief and change to an umbilical for my Voron 2.4. I modified the stealthburner mount to flatten the side and created a spacer that gets sandwiched between the Roto toolboard and the mount. The…
This mount allows you to use a PINDA mount to hold the Duet Differential IR sensor.
Replacement lock for Luxaflex Duette shades. The wires of our Duette shades cut through the original lock part. My apologies for the bad photo's. I already installed the lock and I am hesitant to take it apart just for some photo's :-)…
The base plates of my Luxaflex Plissee broke down after 10 years. It keeps my plissee nicely in the windowsill. This design replaces the original base plate. I increased thickness on several place and used PETG for strength purposes. It…
Description: This is a Duet 3D Mini 5+ ethernet box it fits the Prusa Mk3s/+ Frame. Use new Pulse XE file for Pulse mount. There are two box files, one without bridging. Print settings: No Supports necessary 3-4 Perimeters 25-35% infill…
Small enclosure for a Duet Maestro and a Meanwell LRS-150 or similarly sized PSU. The front and back parts can be printed as one piece if your printer is larger than ~260mm on an axis but as is it isn't modeled to print that way. I wired…
Core top piece for the MP3DP v5 using the Hemera hot end and the Duet 1LC Canbus tool board.
my wife wanted to get some Suet bird feed, but we didnt have a feeder. since she's let me procure more filament lately, she asked that i make her a feeder. planning to print in HS-PETG / Rapid PETG filament since it will be outside.…
Update: Duet Wifi Rev. 1.05 and up have a larger wifi antenna. Please use the files "halter_leiterplatte_duetwifi_rev105-3.stl" and "blende_duetwifi_rev105-3.stl" for this board. These parts are identical to the original ones with the…
----for english, please scroll down---- --- moved from MyMiniFactory --- Halter, um einen Duet 3 6HC-Controller in einen Snapmaker J1 einzubauen. Die Duet wird über Luftkanäle mit einem 5015-Radiallüfter von unten gekühlt. Hierzu muß…
This is an enclosure for mounting a Duet WiFi controller to a D-Bot or other printer that uses V-channel extrusions as the frame. Its designed to be mounted vertically, maintaining passive airflow over the rear of the board per Duet…
I designed this mount to attach a Duet Toolboard 1LC V1.3 to the Voron Stealthburner. I found that the board doesn't fit very well on Voron so, after several iterations, I came up with this design to locate the board in the sweet spot to…
Update: Added a Duet3 mini5 mount also. Fits a Duet2Wifi or Duet2Ethernet (since they're the same board). Screw board down directly into the mounting lugs with M3 screws. 3 holes on the side for M5 bolts to bolt to your 20-series…
This is a remix for the excellent remix ( Thingiverse - Digital Designs for Physical Objects - Thingiverse ) of Elescar featuring the same thread and bowden collet insert dimensions - just with 3 arms instead of 2. 2 arms caused some…
Prints without supports in one piece on Mk2/3 sized print beds. 10% infill is fine. Added a 2-part versions for smaller printbeds like the Mini, complements of user Darque Flux .
This is a stand-alone casing for the Duet 3 mini 5+ controller board. It is designed to stand up vertically and has room for a 40x40x20 mm fan to ensure proper cooling. The fan should blow air outwards, so that cool air enters via the…
This is a stand-alone casing for the Duet 2 Maestro controller board. It is designed to stand up vertically and has room for a 40x40x20 mm fan to ensure proper cooling. The fan should blow air outwards , so that cool air enters via the…
Remix of the photo caddy insert for the Fox In The Forrest: Duet game.
This is is a remix of LumberjackEngineering's PanelDue case for the original Duet display. I modified the case for the clone version (from fysetc 5 inch V3). What I changed: Cutout for flash cable and SD card Cutouts for reset and erase…
Bottom part of the original model was difficult to print. The wall between the bearing and the idler has been changed for easier printing. Added mounting hole for mounting. The original idler is compatible. Link to assembly instruction…
Duet 3 Mini 5+ Wifi case for Prusa Full Bear upgrade. Its designed to fit Prusa Full Bear upgrade by Grégoire Saunier https://github.com/gregsaun/prusa_i3_bear_upgrade I have taken some inspiration from here and there for this design. But…
This is a simple design I came up with to mount a Duet 1LC board on the print head. It replaces the original strain relief on the tool head while maintaining compatiblity with the original part cooling fan. | No | Qty | Name | Printable |…
Small adding hole on the case easier to slide the nuts . i forgot to add the stl.. Simple , pratique , efficace, aéré , léger, avec porte, et plusieurs fixations pour bien ranger les câbles . Impression sans support , tout y est . Et…
Here are my mounts to convert your sapphire S from the lerdge board to a Duet maestro (original or clone) with a 5" pannel due screen (with vented front grills for version without power button only) With a 3d printable touch pen and sd…
this is a duet wifi mount and paneldue enclosure set for the East3D gecko. (Added a paneldue touch-pen and sd card slot pen holder for the top of the paneldue) (models may not be properly positioned on build plate) how to instal : 1-…
A cover to protect the circuit board under the PanelDue5i. Uses the same hardware typical to the Caribou construction. You need 1 cover and 2 brackets. Use m3 bolts to assemble the pieces, then bolt to the 3030 frame.
This mount allows you to easily attach a Duet Tool Board 1LC to a Jubilee Baby Bullet Extruder. From there you can wire up the components to the tool board with ease. Use support enforcers on the standoffs to make sure they are supported.…
Duet3D 6HC electronics case for Prusa/Pulse D-frame printers. Case mount allows the use of the large 6HC and the original D frame mount holes. This version uses a 120mm thin fan underneath the main board to cool the steppers. I am…
As usual, I got something new for my Kossel (32-bit at last, whoop whoop, and YES it's worth it!) and had to roll my own mounting system. This uses a 5010 fan for cooling, with exhaust out the side of the printer frame. Airflow seems…
I created this sensor case to enable a full retract of the remainder of filament after the filament out sensor is tripped. The case has two e3d heat breaks with conical entries for ease of getting filament through. at the end is has a…
These two "Channels fit under the DuetWifi. Each can have it's own 40mm fan. In my setup the fans are connected to the FAN2 connector and controlled by: M106 P2 L230 T40:65 H100:101:102 They will only turn on if Processor gets over 40…
Just something simple to keep the thing off the bench. I hope to print a better solution when the Voron is actually up and running. Hardware: 4x M4 Nut 4x M4x10 3x M5x8 Category: 3D Printer Parts
The Wingspan Nesting Box is a fantastic organizer, but it does not have specific places to store the Duet tokens from the Asia expansion or the Hummingbird tokens from the Americas expansion. I saw the Wingspan Hummingbird insert for…
Just a remix of but for the Oribiter 1.5
Duet 2 wifi case for a Prusa i3 clone. This case was drawn from scratch in Fusion 360 and was inspired from work done by https://www.thingiverse.com/thing:2812834 https://www.thingiverse.com/thing:3356858…
I've build a Prusa Mk3S BEAR from scratch, using a Duet Wifi. I wanted to keep the style of Prusa Einsy Case, so i've modify it to fit the Duet Wifi and add a place to fit a 40 40 10 fan (i used a noctua). I also added a bunch of place to…
Insert for Codenames / Codenames Duett with square key cards
This Wingspan Asia Duet tokens are designed for you to print in any color you like , making it more personalized for you - or to replace if you lose some. Printing Notes PLA or PETG - cheapest and good result - I think every filament will…
Big Thank You to kuhnikuehnast for the PanelDue angled case! This is the only case I could find that perfectly fits the current (2019) version of the 7" display. However, the case is intended to be mounted to aluminium profile poles, but…
This is a model of the Duet Tool Distribution Board. The dimensioning is accurate and the parts have been added for looks but the parts are not 100% accurate so don't rely on them. I had to use the diagram of the board on their site for…
This is just a cover for the Duet Magnetic filament sensor. I printed it in ABS because of the heat involved. Simple print , no supports. Just got tired of looking at the circuit board all the time. You will need two M3 x 25mm bolts and…
This is an enclosure for the Duet 2 Maestro for the (anet) AM8 frame. It mounts to a 2040 extrusion so should be compatible for plenty of other printers. The Duet mounting dimensions were used to create this…
I liked the design of this Duet3D Wifi Controller Box https://www.thingiverse.com/thing:2481027 but was struggling to find a suitable way to attach it to my P3steel frame (Orballo printing 2.5). This is my solution. Intended to be…
A DuetWIFI/Ethernet case. I liked the overall size and proportions of this box https://www.thingiverse.com/thing:2481027 but found it to be a little to fiddly for my liking. I have remixed this to have a one peice lid with the Duet3d logo…
Duet 3 Case made to be mounted onto Aluminum Extrusion. Support 40mm fan, I used a noctua NF-A4x10 (40mmx10mm) Print with Supports if you don't have good bridging, if you do you you're fine, mine(pictured) was done without supports.. SBC…
Print with any filament, 0.4mm nozzle, 10%+ infill. In PrusaSlicer, change the print orientation. Use 2x10mm countersink M3 screw and 2 M3 T-nuts to mount the support on 2020 extrusion Use 1x8mm M3 screw on the top left corner to mount…
Print with any filament, 0.4mm nozzle, 10%+ infill. Use 3x20mm M3 screws to mount the cover onto your own board support mount.
Replacement cord guide for the cord loop version of Hunter Douglas Duette cellular shades. It goes inside the top of the shade just behind where the cord loop enters the assembly. You need to remove the end cap to access it. As modeled it…
A simple remix of the PanelDue 5i front case piece to suit mounting to the Seckit SK-GO. This part is required as well as the "5i_Case_Rear.stl" part from the original file set: https://www.thingiverse.com/thing:2799628/files Category: 3D…
A simple remix of the TC-V6-DOCK-BRACKET-HEMERA-With-Nuts.stl part that makes room for attaching a Duet 3 tool board. Print the rest of the parts from https://www.thingiverse.com/thing:4786232 , and I'd recommend printing the part cooling…
A simple remix that adjusts the PCF ducts to accommodate the SOD123 diode that's present on the v1.1 version of the tool boards. Print all of the other parts from the original version: https://www.thingiverse.com/thing:4194982 Category:…
Can be used to mount a Duet Magnetic Filament Monitor to an E3D Hemera ToolChanger tool head. The mount is "shimmed" at the top, above the "V6_Receiver_Top" part from the toolhead. You will need to switch to 4x 18mm M3 screws to make room…
Quick design exercise, adapting the right case for use with a Duet 2 Wifi. Not tested, and because of that I'm also adding the STEP file, so you can make modifications if needed. Will probably need tree supports for the front cutout.…
This is an enclosure for the Duet 2 Ethernet that I designed to mount to the bed frame of my modified CR-10S. The enclosure mounts to the frame using the corner mounting brackets. The enclosure lid is optional and comes with holes to…
I really loved the idea of https://www.thingiverse.com/thing:3391679 but because of the bridges it is not really printable in PETG ( removing support will result in destruction) So remixed the one from Robotics92 to put the Board a little…
Update 21Oct2018> As the original design was for a specific corner location on my "Pi3 steel", ive now created a "3-sided" case cover version with new base plate. Rev2 Recently received my Duet wifi and wanted an "open" style casing with…
Duet Magnet Filament Sensor Cover Hey maker! 👋 Protect your filament sensor with this simple cover. Features: Easy to print and mount with a longer screw. Protects the circuit board and connector from damage. Screws remain accessible for…
Modified keystone blank for my Voron 2.4 build to mount the external antenna for the Duet 3 mini 5+ WiFi antenna. Category: 3D Printer Parts
2022-02-20 With enclosing the printer, mount for the screen had to change. Rear panel now has an off-center mount to facilitate mounting the screen on the top left corner of the printer. The mounting bracket that goes on top of the…
This is a mount used to attach Duet 3D 1LC toolboard to the EVA 3D carriage platform for MGN based 3D printers using the LGX extruder option. Mounts in place of the cable relief arm while retaining its functionality. Design draws…
Adapter plate to allow the Duet Maestro or Duet 3 Mini 5+ board to mount in the stock Ender 3 Pro electronics enclosure. Use the Ender 3 screws to bolt the adapter down to the Ender 3, and then bolt the Maestro down to the adapter using…
I remixed the design to reduce the amount of plastic required. It's just a basic temporary mount for the Duet Wifi electronics board. Provides ample space behind the board for airflow, and if mounted with the board vertically, should not…
