Electric Skateboard ESC Controller Case (For Haero Bro Type Decks)

This is a custom-designed ESC cover/case specifically for Electric Mountainboards, tailored for the Haero Bro Type Deck. It features space for a Flipsky FT85BD ESC, two 16mm LED lights, optional underglow lights, a heatsink/anti-sink gasket, and 6mm M3 (4.2OD) inserts. The design also accommodates flat, thin-head M3 8-12mm screws.

This design is easily customizable, allowing you to add or remove components as needed. I have used this exact print for my Haero Bro Esk8 with the same ESC. The motor wires fit securely through the provided wiring channel, ensuring they remain secure when the top is closed.

For my print, I opted for black PETG, which matches my build and provides good strength. I hope this information assists you with your Esk8 build as well! I printed the cover flat at an angle on a 220mm bed plate using my Kobra Go printer.

The design offers ample space for my foot, and there is enough room to mount the bindings. The lights are very bright, especially during braking, which is a fantastic feature with this ESC. I also plan to add a neon strip underneath, so I made small holes on each side for the 2-pin wire to come through, connecting to the front light port on this ESC.

Parts used:
www.aliexpress.com/item/1005005070119421.html
www.aliexpress.com/item/1005003582355741.html
www.aliexpress.com/item/1005006190960201.html
www.aliexpress.com/item/1005006897517292.html