CLAMPS 22 to 50
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CLAMPS FOR ANTENNAS 22 22.8 25 30 32 35 36.5 40 50
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 131
- Makes
- 1
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Antenna Clamps Set (Ø 22 mm to 50 mm)
A set of robust, customisable mounting clamps designed primarily for antenna masts and tubing applications.
Available Diameters (mm):
22 / 22.8 / 25 / 30 / 32 / 35 / 36.5 / 40 / 50 mm
Hardware Required:
Screws: M6 × 60 mm
Design variants: Models available with or without hex nut pocket
⚙ Recommended Print Settings:
Material: PETG or ASA (recommended for outdoor UV and weather resistance)
Layer Height: 0.15 mm or 0.20 mm
Perimeters / Walls: 2 to 6 (increase walls for maximum mechanical strength)
Infill: 15% to 100% (depending on required stiffness)
If you find this model useful, please leave a Like and post a Make! Feel free to share your feedback or suggestions for future improvements, and check out my other models on my profile.
Best 73,
F1NSR Yannick