Modular Multi Filament Spool, Chainable, Customizable, Fusion 360 (Bambu Lab Spool Base) [Symmetrical & Notch Tightened edit]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of a Modular, Multi-Filament Spool for aesthetics from @EricPlante_437485
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 40
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
My remix is entirely for aesthetic tastes. I noticed after printing that there was a slight asymmetrical rotation to the A and B sides and further chaining B sides you continue the rotation. If you're OCD like me, here is the fix I made adjusting Side B's notch location so that it properly lines up with Side A, and further Side B chains do not continue to rotate. This adjustment inadvertently removed the ‘feature’ of slight wobble between any two sides.
Please refer to the original for instructions on editing the file and producing your own STL's. I have, for convenience, provided a Side A 17mm and Side B 13mm to fit with a second Side B 30mm for an even ‘standard’ 60 mm split spool 30/30, and a Side A 20mm and Side B 20mm to fit with a second Side B 20 mm for a 40/20 spool.
Thanks to @EricPlante_437485 for the original design and instructions.
This is my first upload and share so I hope I attributed everything sufficiently.