1 / 5
Chevrolet GMC Truck Phone Dash Mount — image 1
1 / 5

Chevrolet GMC Truck Phone Dash Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Drop in modular mount for Chevrolet and GMC pickup trucks. 2024+ with 13.4" Touchscreen.

Rating
5 / 5
Likes
34
Downloads
446
Makes
1
Views
3,131
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Modular drop in dash mount for 2024+ Chevrolet and GMC trucks with 13.4" touchscreen. Additional hardware required for assembly (see BOM below). The included .f3d file is parametric and will allow inputs for phone size and desired arm length (go to MODIFY→CHANGE PARAMETERS). STL file phone holder sized for an iPhone 15 plus with case.

Install all threaded heat set inserts (7xE) into the 4 supports (3 double, 1 single). 

Assemble the supports onto the base using (7xF). 

Install the base into the pocket of the dash. Installation requires the removal of the (2) screws from the recesses in the dash pocket. Drop the base in and install using the (2) removed screws.

Assemble the top mount plate onto the supports of the installed base using (7xF).

Install (1) ball mount to the top mount plate using (2xA) and (2xC).

Assemble (1) ball mount to the cell phone holder using (2xA) and (2xB) 

Assemble the (4) ball clamps, thumb screws, and mount arm to the cell phone holder and mount plate ball mounts. Use (2xA) and (2xD) with the thumb screws to tighten down the arm in the desired location.

BOM:

A - (6) - M5 Nylon lock nuts

B - (2) - M5 x 0.8 x 12mm socket head cap screws

C - (2) - M5 x 0.8 x 14mm socket head cap screws

D - (2) - M5 x 0.8 x 40mm hex head bolts

E - (14) - M4 x 0.7 x 10mm flat head screws

F - (14) - M4 x 0.7 brass threaded heat set inserts

Tags