1 / 4
Comgrow/Sovol SH02 Filament Dryer 40mm Fan mod — image 1
1 / 4

Comgrow/Sovol SH02 Filament Dryer 40mm Fan mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This set of files is to replace the stock blower-style fan with a standard 40mm computer fan.

Rating
5 / 5
Likes
43
Downloads
212
Makes
2
Views
3,081
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

If you have a sovol SH02 filament dryer, you know how annoying the fan is. This fever dream of a mod replaces the stock fan with an off the shelf 40mm computer fan and makes the dryer essentially silent.

You will need, at minimum;
A 40mm fan (must be 3pin with tach)
1x 40mm fan duct (printed)
2x comgrow base half (printed)
 

Optional but recommended- 
4-8 #6 2-½ inch wood screws from hardware store
some small twist-type wire connectors
A spare JST-xh connector in case the stock one gets damaged

The pinout of PC 3 pin fans is different than the stock- you will need to either swap or splice the wires on the 40mm fan to match the default fan pinout. 
If your fan doesn't have a tach wire, the dryer will shutdown. 

I'm sure i've left a lot out, i'll update this as I go. Feel free to post questions and I'll get to them as soon as i can.


Thanks for looking!

Tags