Comgrow/Sovol SH02 Filament Dryer 40mm Fan mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This set of files is to replace the stock blower-style fan with a standard 40mm computer fan.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 212
- Wydruki
- 2
- Wyświetlenia
- 3081
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
If you have a sovol SH02 filament dryer, you know how annoying the fan is. This fever dream of a mod replaces the stock fan with an off the shelf 40mm computer fan and makes the dryer essentially silent.
You will need, at minimum;
A 40mm fan (must be 3pin with tach)
1x 40mm fan duct (printed)
2x comgrow base half (printed)
Optional but recommended-
4-8 #6 2-½ inch wood screws from hardware store
some small twist-type wire connectors
A spare JST-xh connector in case the stock one gets damaged
The pinout of PC 3 pin fans is different than the stock- you will need to either swap or splice the wires on the 40mm fan to match the default fan pinout.
If your fan doesn't have a tach wire, the dryer will shutdown.
I'm sure i've left a lot out, i'll update this as I go. Feel free to post questions and I'll get to them as soon as i can.
Thanks for looking!
