QSERF DMR by Quantum Science
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the DMR model from the Roblox game QSERF (Quantum Science Energy Research Facility) created by Quantum Science.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 143
- Makes
- 2
- Views
- 366
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
ALL ATTRIBUTIONS MUST BE MADE TO QUANTUM SCIENCE
DMR Printing Project Overview
First and foremost, I did not design the original model from the game. I am simply making a printable version of it so people can have their own physical one.
I printed mine at 200% scale with no supports (sounds crazy but it worked). I scaled the sizes of the laser intakes and fluid intakes down (relative to 200%) by 5%. I used Elmers Glue-All to attach all the pieces together and left it dry overnight. (Obviously, I wouldn't use hot glue since it is plastic but do what you want). I used a piece of foam with a hole cut out to rest the model in to dry because it can't stand up right.
Modeled using Tinkercad
Printing/Building Instructions
The best way to build this model is to attach the other models separately to the main two structure models:
Print the 2 main structure parts.
Print 6 laser intake parts.
Print 4 fluid intake parts.
I printed the laser intakes and fluid intakes at 5% less scale than I did for the 2 main structure pieces so they would fit inside, but I think something around 3-2 percent smaller would still fit.Glue 2 main structure parts together. Make sure they are the correct way around. Look at the full DMR model to see what the finished version should look like.
Glue all 6 laser intake parts to structure in the large holes.
Glue all 4 fluid intake parts to structure in the smaller holes. (on sides of structure)
And you're done!
Make sure to check out Quantum Science, they make some pretty cool stuff!
-Ackker