1 / 3
Mold to make a silicone o-ring for the Open Ball vise base. — image 1
1 / 3

Mold to make a silicone o-ring for the Open Ball vise base.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mold to make a silicone o-ring for the Open Ball vise base.

Rating
0 / 5
Likes
5
Downloads
42
Makes
0
Views
396
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

I've had a problem finding a proper rubber band for the base of the famous Open Ball vise.

This is my temporary (or not-so-temporary) solution - to make my own.

The result and its sturdiness may vary depending on the silicone you use, but it is easy to make a new one.

BOM:

  • Kinda any silicone which can hold its form to
  • 6x M3 screws (any length from 12mm to 20mm will do)
  • 6x M3 nuts

Instructions:

  • Assemble the mold with the hardware.
  • Apply a soapy water to it generously to serve as a release agent.
  • Apply an excessive amount of silicone into the groove. (The leftovers will be squeezed out later).
  • Press in either the mockup ball or the real ball of the vice. It should be covered in a soapy water or another release agent as well.

 

 

Tags