1 / 2
Raspberry Pi Zero NES case with functioning power LED, print in place buttons
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Retro themed Raspberry Pi Zero case, with access to all (usable) ports, microSD slot and USB hat ports
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 94
- Makes
- 0
- Views
- 926
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Necessary hardware:
- Raspberry Pi Zero 2 W: https://www.amazon.de/-/en/gp/product/B09KLVX4RT/
- USB hat: https://www.amazon.de/-/en/gp/product/B09B9Y17MV/
- Optional heatsink: https://www.amazon.de/-/en/gp/product/B0B4JQQ8ND/
- 1x M3x6 threaded insert
- 1x M3x12 countersunk screw
- 4x M2.5x6 countersunk screws
- Optional: Red LED with 3mm diameter + suitable resistor (for power LED)
- Optional: 2x 6x6x4mm push buttons (for power & reset buttons)
- Optional: RC wheel weights so stiff cables don't lift the console up: https://www.amazon.de/dp/B00IJFXMIA
Note that the OTG microUSB port is not usable with the USB hat connected, as such I didn't make it accessible through the case
I'm using Recalbox as OS, check out their tutorial on wiring/configuring power led & buttons: https://wiki.recalbox.com/en/tutorials/others/add-on-off-button-to-your-recalbox