E-Switch RA1 Housing
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.61 – €0.75 net (excluding VAT)
For file: RA1 Switch Housing_0.4n_0.2mm_PETG_MK4IS_38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.68 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 38.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A mount for retrofitting a rocker switch into an existing system.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Housing for an E-Switch RA1 panel mount toggle. Pictured with the RA17131123 but should work with any of them. It should be easy to adjust the mount hole dimensions for other switches in the source files.
Provides strain relief, access to remove the switch if desired, and something to zip tie mount. I made this because I couldn't find any inline lamp-style cord switches rated for sufficient current.
USE WITH INSULATED SLEEVES ON YOUR WIRE TERMINALS! Otherwise someone sticking their fingers in there may shock themselves. I also recommend locking terminals so they can't pull loose. As always, know your local code and use appropriately rated parts and materials.
Print it flat side down, no supports needed.