1 / 2
Hook headphones next to table NEW 01-22
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hook for headphones table
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 1
- Views
- 266
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Headphone holder with lip preventing slipping, mounting under the table with 2x D3mm screws, doublesided tape or glue.
Curent model is for headband width of 30mm, the diameter of the rest surface is roughly 135mm. Lip 5mm height.
You can scale the model to fit your very own headphones better. Mine were Sony MDR-100A.
V4 adds slots that will make fixing the hook with screws precisely a lot easier.
V4 + JACK adds a hole for holding a JACK 3.5mm (real size of hole 3.8mm for horizontal compensation) if you want smaller hole, just scale the hook to 93% for 3.53mm hole.
NR, CZ