Wall mount for IKEA Badring water sensor, with the option of attaching a cord to extend the sensor.
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.08 – €1.31 net (excluding VAT)
For file: Badring Ikea Wall mount_0.2mm_PETG_MK3S_1h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.19 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.33 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Now with this wall bracket you can connect other switches without having to do anything special to the unit itself.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 80
- Makes
- 1
- Views
- 349
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
Wall mount for Ikea's Badring. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you can connect other switches without having to do anything special to the unit itself. Take and strip the cord, both conductors 35 mm. Twist the copper wire from one conductor and start mount from the backside, in the upper hole, and insert the copper wire into the lower hole at the frontside. Twist the copper wire on the backside. Do the same with the other leader. Now insert the Badring into the holder so the sensors on the Badring make contact with the copper wires.
Happy printing!