1 / 6
Brother PT-E550W Case Latch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement case latch for Brother PT-E550W Label Maker
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 81
- Makes
- 1
- Views
- 391
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Printed using PETG, but any material should be fine. You'll need a little bit of flex to get the latch onto the corresponding pins of the hinge.
On the hinge, enable “Supports on build plate only”.
On the latch, I used paint-on supports and selected the face of the overhang only. Use “For support enforcers only”. See Prusa Slicer screenshot. Alternatively, it is probably fine just enable automatic supports everywhere. Automatic supports will generate supports for the latch overhang as well as inside the round holes.