1 / 2
Sodastream Bottle Drip Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is my attempt at addressing this topic
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 28
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I have experimented with several existing designs, but I wanted something different, so I created one:
- No contact with the inner bottle or the inner wall of the cap.
- No supports, adhesives, or fasteners are needed.
- Press fit installation with various color combinations.
- Compatible with 1L or 0.5L bottles.
Printing
- Use a thin layer height (0.08 mm) for printing the pole to improve the surface finish.
- Recommend 4 perimeter walls and 20% infill.
- For the drain, use 0 top layers, 0 bottom layers, and honeycomb infill.
Not recommended for use with glass bottles.