Manfrotto replacement leg-clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement leg-clamps for the Manfrotto 718B digi tripod.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 51
- Makes
- 0
- Views
- 316
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I unfortunately discovered that the leg-clamps on the 718b tripod are prone to cracking (or at least the outermost ones are). I found a few replacement versions online and even tried printing one, but the fit was very tight and it lacked the aesthetic styling of the original. I therefore designed my own version, trying make the design as similar as possible while still strenghening the walls to try and prevent future breakages.
Assembely instructions made can be found here: https://www.instructables.com/Repair-The-Leg-Locks-on-Your-728B-Manfrotto-Tripod/
(The instructions were not made by me and are really intended for a differnt set of replacements but they work for mine too).
Currently, I only have a model for the outermost leg-clamp, but in the future I plan to make versions for the other ones as well.
Printed in Copymaster deep black PLA with 3 walls and 20% infill.