Counting matching models…
If you own several cameras you don't want the hassle of mounting your plate any time you change cameras. Print as many as you need! This plate also works great with my phone frame. Use two M4 bolts to attach it. You will have a phone with…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
Quick Release Plate Spare Part Is plastic enough for your expensive camera? Well, a metal plate certainly is unbeatable. But my PLA print never failed! For studio and indoor it does the job! You will need a round rubber band to fit the…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
1/4" quick release replacement plate/adapter for the Manfrotto compact action tripod
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
All the cam locks on my old Manfrotto 055PROB tripod broke. As the original spare part (R190,387) is absurdly expensive (needed six), I drew my own. Modified the original shape for easier printing and better durability. As the geometries…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple adapter allowing you to fix your camera with a Peak Design plate onto a Manfrotto tripod using the Manfrotto Quick Release plate. The mating is a simple slide-in, and the camera is not kept onto the adapter if not fixed…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Plastic clamps in my old Manfrotto tripod became brittle and snapped off. Therefore the tripod was stashed away for a few years. As a natural hoarder I just did not have the willpower to finally throw it away. That is until I got my hands…
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for PETGSource material: PET
Printable replica of the original Manfroto 200LT-PL quick release plate. This custom model is a precise duplicate of the original design, ensuring a seamless fit and perfect functionality on your tripod. Download and print this accurate…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
EN: Our school happens to have tripod with Manfrotto 701HDV camera head. The head and tripod (Manfrotto 755XB) is sufficiently stable to support Hadley, so I fashioned dovetail / shoe / adaptor to attach the telescope to the tripod. The…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
The Manfrotto Compact Advanced Smart Tripod is an okay-ish tripod (cheaper Chinese ones on Amazon are better - trust me, don't buy this thing), but it lacks the little hook you can add bags to weight it down. This simple printed hook…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
This model prints a “handle grip” around a 60mm x M8 bolt, enabling you to tighten the bolt with ease and without extra tools. I designed it to fit the photo head of Manfrotto 804rc2, as the original 3 screws were lost, and I didn't want…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
I printed in both PETG and ASA with 80% infill the the spiral part up, with supports on buildplate only 0.15 precision, and both are adequate as new. Carve out the support from the screw hole with 10mm drillbit and the smaller hole with…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
When you use Nikon Z6, Z7, Z6II or Z7II with Z lenses and FTZ Manfrotto plate cant be on camera. If you use this, you can use it all the time. This is model used on your own risk. I tested it with Nikon Z6 II and lens under 500g. You need…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET
A spare part lever for Manfrotto model 200 video head. Replacement for the mount plate release lever.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
I needed a way to hold my intervalometer easily to keep it dry and stop it from damaging the delicate pins if it fell. This tidy simply slides onto the leg of a Manfrotto 190B tripod (dia 26.5mm) and is secured with a M5x12 cap-head…
Print approx. €5.57–€6.80 excl. taxPreliminary estimate for one variant
This is a base for use in Manfrotto tripods, specifically the MH494-BH, though I'm sure it'll fit others as well. The screw used is a 1/4-20 with a 5mm shank and 1/4 inch of threads. The hole is threaded in the model, so you should only…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
20mm mounting surface for a Manfrotto video tripod. Designed to clip onto the legs which are two 16mm rods. The surface is designed to support a piece of velcro, or the model can be modified to hold an accessory. I will be using multiple…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Ein Haken für die kurze Mittelsäule 055xccsb für das Manfrotto 055XPROB Stativ. Getestet mit 21 Kg Belastung wobei sich der Haken nur leicht verformt. Die Bruchlast habe ich nicht ausprobiert. Für die Befestigung benötigt man eine…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
Ein Haken für die Mittelsäule des alten Manfrotto 055c Stativ. Für die Befestigung benötigt man eine Schraube M8 x 40. Es empfiehlt sich eine selbstsichernde Mutter zu verwenden damit man durch zu starkes anziehen das Aluminiumrohr nicht…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
All of you know this situation: you printed your favorite 3D benchy and want to take a cool picture. You have your cam handy but &$§@**!!!! Why do I need to unscrew all the quick release plates? After roughly one or two hours of screwing,…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
My church needed something to lock down the feet of the tripod for the live stream camera to increase stability. My wife thought the gafffer's tape was too ugly, so I designed these little sockets that allow you to strap the feet in using…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Replacement knob for Manfrotto 501HDV video head. Repuesto Manfrotto 501HDV tuerca agarre central. 13mm hex nut insert
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Replacement quick release plate for Manfrotto Compact Action tripod. Intended for use with either 3/8 or 7/16 length 1/4-20 round head screw. These should be easily available at any hardware store or online at McMaster-Carr (McMaster item…
This is a replacement for the camera plate of a Manfrotto 501 HDV tripod. It doesn't have all of the same exact holes and pins, but should fit the tripod and allow for mounting screws to allow a camera to be attached. The plate should be…
Making spare parts is fun and rewarding. I made this part since i needed it, I remember i've found similar parts before, but none seems to fit my old tripod. I hope you enjoy it! Measurements: width: 52.4mm (2.06") Depth(largest): 42.7mm…
One of my older models. Source included. Print with a durable material, eg. PETG. Print with support (I know, I know, next time I make it more clever…) :) Feedback is important! I spend countless hours perfecting and testing my designs…
Poignée grip pour Canon EOS R7, rajoute 16mm a la hauteur idéal pour les grande mains, permet une meilleur prise en main du boitier. Pour sortir la batterie malheureusement faut le dévisser, mais comme on peut le charger via USB-C c'est…
I needed a quick release plate for our Manfrotto type camera tripod heads. If a cameraman forgets the original QR plate, there is a back-up in the camera bag. I made the plate according to the dimensions on the Manfrotto website: 90 mm…
200PL and 410PL quick plate compatible design. Now with 375PL model. You can get any length if youn use the OpenSCAD file. Print upside down, no support needed. All holes are tailored for M3 internal hex head screw.
Adapter Spigot: Standard 6.4mm and 9.5mm threaded ends for compatibility Tripod adapter spigot with universal 16mm diameter Ideal for use with a variety of stands and grip gear Attachment (Bottom) 3/8″ screw, 5/8″ (16mm) stud Top…
I wanted to conveniently be able to swap a Kinect and a DSLR on Manfrotto tripod with a 701HDV head on it, so I made a quick release plate compatible with the 501PL plate that I have. The OpenSCAD file has parameters to adjust the…
Replacement wedge for the Manfrotto Super Clamp
This is a basic implementation of the 200PL tripod quick release plate used by a wide range of Manfrotto tripods, complete with FreeCAD source, for adaptation projects. There are lots of 200PL plate STLs out there, why another? Mostly…
Modified design to incorporate the Manfrotto QR-RC2 quick release and a 1/4" thread for universal phone mount. Category: 3D Printing
Someone left out a perfectly good Manfrotto MKC3-H01 tripod in the trash today. All it was missing was the adapter plate. Not any more! This is a trivial remix of operandi's Manfrotto 785B Adapter to accept an Adafruit ¼" Screw with…
https://youtube.com/shorts/ATyOaOh2tdw Just a simple 3d printable platform I can attach to my tripod (Manfrotto RC2 Quick Release) that allows me to easily position objects that I need to 3d scan in the center of my room Subscribe or…
Simple replacement part. Print with PET, ASA or even PLA. Opt for 100% infill and enough perimeters.
Gridfinity holder for the Manfrotto Pixi Mini Tripod. Link to the item: https://amzn.to/4l7ERBT Links provided may be affiliate links meaning I may earn a small commission at no extra cost to you. Some may also include discounts or…
Simple Quick Release adapter comparable to the Manfrotto 200PL
Cable guide designed for Manfrotto Avenger - C-stand Arms. Available for two types of cables: common USB and XLR。 The larger clip can secure cables with a diameter of up to 8mm. PETG, ABS, or ASA are recommended than PLA.
This project includes three versions of the 3D-printed Manfrotto 500PLONG quick-release plate, designed for use with Manfrotto video tripod heads. These models are compatible with the 500PL system and offer options for different printer…
Use 2x M5 nuts and bolts to secure the two halves together. All parts can be printed without supports.
Reverse engineered quick release plate for Manfrotto 410 geared head and compatible heads
As we sometime loose the upper Rubber Part of the Manfrotto Superclamp, and there's no official Spare Part beside of buying the wohle upper Lid. I Decided to design it by my own. As a Lighting Fixture Clamp is a Safety Part i'm not…
I made this for attaching my ring light or camera on ceiling / wall. Quick release and tested with Manfrotto plate. Video of this thing: Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Category: Camera
Here's a plate adapter i designed to take a mini monitor with 75mm vesa holes on the back to a Manfrotto clamp with a tripod screw.
This wedge is an insert for super clamp. When applied it helps to grip flat surfaces. Printed with supports.
A printable manfrotto hexagon plate, same as origional but with Arri holes. holes are for tapping so you may modify them for driect use.
This is a remix of frubino Tripod Cam-Lock Repair parts modified and scaled to replace/repair all 3 cam locks on the Manfrotto 714B. Found the 714B had a smaller cam lock than the ones provided by the original designer and other designers…
Print instructions The recommended material is Prusament PC Blend Carbon Fiber Assembly Description List of non-printed parts 1 pcs - M5 Hex Cap Nut GoPro knobs are in three different lengths for screw: M5 50mm screw with hex head M5 40mm…
These are snap-on mounts for attaching camera accessories to the legs of a Peak Design Travel Tripod. I often use a powerbank and a wifi pocket-router to connect my phone or tablet to my cameras for remote control on macro shots or…
Model This is a combined tripod plate allowing you to switch seamlessly from a Freefly Movi Pro to a Miller DS series tripod in seconds. It is similar to the Ignite Digi Gimbal mate which combines the Movi and Ronin 2 Plates. If you would…
Hello Friends! Here is a system to replace the classical adapter of the Mannfrotto light 290 Tripod original one in order to be able to directly snap on you camera with a Capture Plate (from Peak Design) mounted on. Here is a video on how…
Tripod adapter I've designed for my iPhone 13 Pro. Opening width is 9.5mm so any phone thinner than that should fit with no problem. Made for Manfrotto Element tripod, but would work with any tripod that utilizes a similar mechanism.
Made this for my Celestron Nature DX ED 10x50mm roof binoculars. It was modeled to be similar to the Celestron Binocular Tripod Adapter (https://www.celestron.com/products/binocular-tripod-adapter) so it might fit Celestron’s other porro…
Replacement leg clamp for a Manfrotto BeFree Advanced Tripod. Works well in PETG Use 3 perimeters and 20% infill to ensure its strong.
*This is a remix of https://www.printables.com/model/346298-tripod-phone-mount-14-manfrotto-qr-rc2 so the mount fits on my older pentagon plate for the Manfrotto tripod. *I used…
I unfortunately discovered that the leg-clamps on the 718b tripod are prone to cracking (or at least the outermost ones are). I found a few replacement versions online and even tried printing one, but the fit was very tight and it lacked…
Clamp to hold an Anker PowerCore Speed 20000 PD on a Manfrotto 055 tripod leg. It should also fit any other tripod with a leg diameter of 30 mm. This might also fit other Anker PowerCore products with similar measurements. For reference,…
It is a replacement part of the main plastic part of Manfrotto Compact Light tripod. Mine got broken when was trying to tighten the main pole. This is a full replacement part. to assemble you will need: 3 x M3x16mm screw 3 x M3…
This is a quick release plate to mount a GoPro on Manfrotto 496RC2 ball head mount which uses a 200PL quick release plate. It should work for any Manfrotto tripod that uses the same plate. The plate will accept the official GoPro quick…
There are 2 adapters in here, one has the standard overhang of the actual plate and the other has this removed. Neither have any of the holes or screws of the actual plate and are designed to be incorporated into your thing. There is a…
This is a connector for a Manfrotto 200PL tripod head to an Arcaswiss clamp WITH ARCASWISS MALE DOVETAIL IN THE BACK. It was made with in mind the use of a simple tripod head like 128RC and a camera that's just been removed from a modern…
This is a mount for using a phone on a manfrotto tripod, originally meant for a camera. The mount is adjustable and is able to accommodate phones of different width. Rubber bands do need to be used to keep the phone from slipping out of…
Thanks to https://www.thingiverse.com/thing:1114555 for the original design, I needed this to go on my wall so I chopped off the top hook and added an extra hole for an additional screw. If you orientate it the way shown in my screenshot…
A recommend printing it with PEGT and at least 50% infill. Print it upside down without supports.
Wanted a cheap, simple solution for a tripod spreader. We use a Manfrotto 290 Xtra at work for a Matterport camera and were having issues with keeping the legs spread out when needing to constantly move the camera. I tried to keep the…
Cabel clip for Manfrotto Magic arm 20mm 6.7mm cable Optimized to clip a Microphone cabes to a 20mm tube but works well with 19-22mm and up to 7mm cabeles.
A round quick release plate for an unknown Manfrotto tripod. Designed to be used with an M6 nut and bolt. Can be printed without supports, but it gets messy, as you can see in the pictures.
Manfrotto 200LT quick release plate with a hole so you can attach a Peak Design Anchor Link You will very probably need to add something in between the plate and your camera. With mine (D3300) I took the screw from the original quick…
The lock part for a Base for Quick release Manfrotto type. The original Base for Quick release Manfrotto type can be downloaded from here: https://www.printables.com/model/483865-base-for-quick-release-manfrotto-type
Adapter/dovetail to fit Hadley telescope on Manfrotto tripods using the Befree Fluid Drag System (MVH400AH) head. As Manfrotto tripods do not use the standard Arca Swiss Mount, I had to create a new dovetail to support my Hadley…
This is a clip-on mount which holds and Anker Power Port 6 USB Charger to a Manfrotto Video Tripod. It is currently designed as two parts fitted for my Anker Power Port 6. This allows me to charge all the devices on my tripod (Encoder,…
This is a remix of the A & B clamps from the Modular Mounting System to use phones with thicker cases. Thingiverse does not accept remix links for some reason, so I list it here. This is a remix of the A & B phone clamps from:…
Spirit level mount for a Manfrotto Pixi mini tripod. Fits 8mmx22.5mm round spirit levels. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution: 0.16mm Infill: 50% Category: Camera
Simple adapter to mount a Manfrotto tripod pole on a cabinet. See its function here: https://youtube.com/shorts/R8_4c3V0_90?feature=share The locking mechanism uses a TPU insert that acts as a brake pad to grip the tube without scratching…
A simple adaptor to mount an Arca-Swiss quick release plate to a Manfrotto ballhead. Some commercially available versions of it come with a longer screw, so it may be needed. With my plate (Quenox) and ballhead (Manfrotto Compact…
Der kleine Standfuß des Manfrotto Element MII Einbeinstativ, versinkt in der weichen Erde? Mit dem Manfrotto Element MII Einbeinstativ Fuß , ist dies kein Problem mehr. Einfach auf den Gummifuß aufschieben und fertig.
A simple replacement knob for a Manfrotto tripod head. I lost the knob after it fell off a few years ago, and just now got around to designing a fix for my tripod and figured somebody else may benefit from this. The part should fit snugly…
This adapter is used to hold your euro profile cylinder in a Manfrotto Superclamp. The hold is very secure and works great for impressioning and picking. The lower part replaces the plastic insert that is supplied with the clamp, simply…
The Manfrotto to Peak Design Plate Adapter from @DavideVe_130498 is a nice design, but I was unable to use it with several of my cameras - with the Peak Design plate tightly attached the the base of the camera, there wasn't enough…
Just a basic GoPro adaptor for Manfrotto tripod…that's all.
This is a thumbnut that I designed to be used with Base for Quick release Manfrotto type. It has a short M3 rod bend 90 degrees. This way it offers the best mechanical work and force to grip the Quick release plate. The base can be…
Found an old Manfrotto Tripod no longer in production with swapped parts. Modeled a quick release carriage for it.
Manfrotto 055c Stativ Platte für direkte befestigung des Stativkopfes. Diese Platte ersetzt das Originalteil R055,10. Der Stativkopf kann direkt auf die Platte geschraubt werden. Die Mittelsäule entfällt. Benötigt wird eine Inbusschraube…
Needed a way to get cables off the floor in a studio space but keep it removable. Print tall layers for strength. I used a Modifier in the Slicer to have 80% Infill and 5 walls in the straight part to handle the screw pressure while…
Nut cover for Manfrotto Monopod leg clamp. This was designed specifically to replace a broken part on 434B model monopod. 3D printing not really suitable to replicate the clipping mechanism from original part, so designed for friction…
I have an old Manfrotto Tripod which I couldn't find suitable phone mount for it, so I made one.
Manfrotto monopod wall/cabinet holder Category: Camera
The Manfrotto #115 is a tripod head with twin adjustment levers for rotation along two axes, with a T-shaped camera screw mounting point. Its levers are known as the R3,2830. M8 Ratchet Handle and can be found here:…
2 parts, No Support Easy to print and assemble
Substitute shoe for Manfrotto tripod leg, 16mm diameter. I printed with Colorfabb XT due to its durability.
This is a far more stable design than the original super clamp wedge, because of the missing weak point in the center.
Scangrip Halter für Manfrotto Leuchtenstativ - Hält Nova R bis Nova SPS 6 Wird lose aufgesteckt. Die Leuchte wird eingehängt und kann gut verstellt werden. Nova R hält am besten, da der Bügel gummiert ist. Fotos zeigen Nova R und Nova SPS…
Printed with 20% infill ABS printed for mine Mafrotto tripod. for the Toolbox you will need new feet. http://www.thingiverse.com/thing:1119167 Category: Hobby
I discovered that the best tripod for a small 360 camera was a Manfrotto monopod with a mini-tripod on the bottom. This works because the Manfrotto monopod comes with one camera screw thread at the top, and one at the bottom.... If you…
Quick&easy print to replace the rubber foot of a Manfrotto compact action tripod.
I needed locking screw so i made one. Print, insert M6 screw with some glue then cover with small plastic. Works very well, slighty bigger then original one Print out of ABS or PETG for sturdiness
This is a 10mm riser for Manfrotto quick release plates for use with Analog Sky Sunny/Ember. There are two versions, one that uses short ¼-20 heat inserts and the other screws directly into the plastic. Printing and Assembly notes…
This is a clip-on mount which holds and Anker PowerCore 2680 Power Bank to a Manfrotto Video Tripod. It is currently designed as two parts. I also included STL's which can hold two 2680's This allows me to charge/power all the devices on…
