Manfrotto Stativ 055c Haken für Mittelsäule Manfrotto tripod 055c hook for short center column
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Manfrotto Stativ 055c Haken für Mittelsäule tripod 055c hook for short center column
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ein Haken für die Mittelsäule des alten Manfrotto 055c Stativ.
Für die Befestigung benötigt man eine Schraube M8 x 40. Es empfiehlt sich eine selbstsichernde Mutter zu verwenden damit man durch zu starkes anziehen das Aluminiumrohr nicht verformt.
Gedruckt mit PLA, 70% Infill 3D-Honeycomb.
Die *.bgcode Datei ist schon in der richtigen Lage mit 70% Infill und 3D-Honeycomb.
Falls es jemand ausprobiert ab welcher Belastung der Haken bricht bitte um Nachricht.
…………………………….
A hook for the center column of the old Manfrotto 055c tripod.
You need an M8 x 40 screw to attach it. It is recommended to use a self-locking nut so that the aluminum tube is not deformed by tightening it too much.
Printed with PLA, 70% infill 3D honeycomb.
The *.bgcode file is already in the correct position with 70% infill and 3D honeycomb.
If anyone tries it out and find out at what load the hook breaks, please let me know.