1 / 4
Manfrotto Stativ 055c Haken für Mittelsäule Manfrotto tripod 055c hook for short center column — zdjęcie 1
1 / 4

Manfrotto Stativ 055c Haken für Mittelsäule Manfrotto tripod 055c hook for short center column

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Manfrotto Stativ 055c Haken für Mittelsäule tripod 055c hook for short center column

Ocena
0 / 5
Polubienia
0
Pobrania
21
Wydruki
0
Wyświetlenia
302
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Ein Haken für die Mittelsäule des alten Manfrotto 055c Stativ. 
Für die Befestigung benötigt man eine Schraube M8 x 40. Es empfiehlt sich eine selbstsichernde Mutter zu verwenden damit man durch zu starkes anziehen das Aluminiumrohr nicht verformt.
Gedruckt mit PLA, 70% Infill 3D-Honeycomb. 
Die *.bgcode Datei ist schon in der richtigen Lage mit 70% Infill und 3D-Honeycomb.

Falls es jemand ausprobiert ab welcher Belastung der Haken bricht bitte um Nachricht.
…………………………….
A hook for the center column of the old Manfrotto 055c tripod.
You need an M8 x 40 screw to attach it. It is recommended to use a self-locking nut so that the aluminum tube is not deformed by tightening it too much.
Printed with PLA, 70% infill 3D honeycomb.
The *.bgcode file is already in the correct position with 70% infill and 3D honeycomb.

If anyone tries it out and find out at what load the hook breaks, please let me know.

Tagi