Manfrotto Tripod Base
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.89 – €1.09 net (excluding VAT)
For file: manfrotto_tripod_base_0.2mm_PETG_MK3S_1h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.99 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Base for use in Manfrotto tripods, specifically the MH494-BH
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 28
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a base for use in Manfrotto tripods, specifically the MH494-BH, though I'm sure it'll fit others as well.
The screw used is a 1/4-20 with a 5mm shank and 1/4 inch of threads. The hole is threaded in the model, so you should only use shanked screws, or drill out the threads after printing.