1 / 6
Anker PowerCore Speed 20000 PD Tripod Leg Clamp - for Manfrotto 055 Tripod — image 1
1 / 6

Anker PowerCore Speed 20000 PD Tripod Leg Clamp - for Manfrotto 055 Tripod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clamp to hold an Anker PowerCore Speed 20000 PD on a Manfrotto 055 tripod leg. It should also fit any other tripod…

Rating
0 / 5
Likes
10
Downloads
51
Makes
0
Views
580
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Clamp to hold an Anker PowerCore Speed 20000 PD on a Manfrotto 055 tripod leg.
It should also fit any other tripod with a leg diameter of 30 mm.

This might also fit other Anker PowerCore products with similar measurements. For reference, mine is 62.2 mm wide and 22.4 mm thick.

This is a two-part design. The lower clamp has a solid base to hold the power bank's base; the upper clamp holds it on top.

I highly recommend printing in PETG. I highly recommend printing in PETG. The tolerances are pretty tight for the clamp to hold the power bank. It's a really solid snap getting the clamp on and off the tripod leg so that the stiffer PLA might shatter. Also, for outside applications, PETG makes sense for its higher heat resistance.

Video: https://www.reddit.com/r/functionalprint/comments/kgzpuw/battery\_holder\_for\_timelapse\_photography\_with/

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

25%


Filament:

Prusament PETG Jet Black

Notes:

I highly recommend printing in PETG. The tolerances are pretty tight for the clamp to hold the power bank. It's a really solid snap getting the clamp on and off the tripod leg so that the stiffer PLA might shatter. Also, for outside applications, PETG makes sense for its higher heat resistance.

I've printed with 3 vertical perimeters and gyroid infill.

Category: Gadgets

Tags