1 / 3
Manfrotto Quick Release Plate Riser for Analog Sky Ember
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a riser for Manfrotto quick release plates using 1/4-20 screws for Analog Sky Ember Space Binoculars.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
This is a 10mm riser for Manfrotto quick release plates for use with Analog Sky Sunny/Ember.
There are two versions, one that uses short ¼-20 heat inserts and the other screws directly into the plastic.
Printing and Assembly notes
Directions and notes on assembly
502AH Riser v0.1
- Screw a ¼-20 into the plastic before mounting it onto the quick plate.
- Carefully screw the riser into place and do not overtorque the screws, otherwise it will strip out the plastic.
502AH Riser Heat Inserts v0.1
- Use ¼-20 Heat Inserts such as https://www.amazon.com/dp/B08PVQX853
- Dimensions are 7.64mm long and tapered from 9.55mm to 8.99mm
- Heat inserts are immensely more durable than screwing into plastic, but you can still Jeremy Clarkson them if you apply too much torque.
Printing Parameters
- 3-5 perimeters
- 3-5 Top/Bottom layers
- 50% Gyroid infill
If one wants to be fancy, do 100% infill around the heat insert holes using a print modifier.