1 / 5
Manfrotto 804rc2 replacement handle (Manfrotto R804,99)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement hand screw for the Manfrotto 804rc2 photo head. Handle grip for M8 bolt.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This model prints a “handle grip” around a 60mm x M8 bolt, enabling you to tighten the bolt with ease and without extra tools.
I designed it to fit the photo head of Manfrotto 804rc2, as the original 3 screws were lost, and I didn't want to pay $40 for replacement parts, when a standard M8 bolt would do (total cost less than $4).
You need:
- M8 bolt (fully threaded) x 60mm length
- M7/M8 rubber washer/gasket (insert between handle and tripod for a smooth connection)
- 3x M3 x 11mm bolts, no countersink
I chose 60mm for the bolt length, which results in a rather stubby and short grip, which is still usable. Modify the included design file, if you want a longer bolt and handle.
Printing notes
- Print the base standing up on its narrow end, with a brim. No supports are needed
- Print cap “the right side up”, with supports on the underside (side cutouts don't need them)
- 20% infill / 0.15 / 0.20 layer height
- Print time 2h20m