1 / 5
Dual Ulysse Escapement Test Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the test jig I used to verify functionality of the dual ulysse escapement used in a clock design.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 85
- Makes
- 1
- Views
- 1,311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is the test jig I used to verify functionality of the dual ulysse escapement used in a clock design. Now it's a desk toy.
In addition to the parts uploaded here, one would require the following parts found with the clock (https://www.thingiverse.com/thing:3078909) or
https://www.prusaprinters.org/prints/10771-clock-dual-ulysse-escapement
- Escape wheels 1 & 2
- Roller jewel
- Balance wheel
Pallets
Additionally:3 x 2mm x 16mm dowel pins
- Strips of 1.75mm PLA (or additional 2mm metal shafts) for balance staff and balance spring pin
See it in action: https://www.youtube.com/watch?v=0am1BVUGcfk
Print instructions
Category: Mechanical Toys