Counting matching models…
A centaur-shaped mechanical warrior for your TTRPG of choice. This could be a “Warforged” from Eberron , an “Anvilwrought” from Theros , or a “Clockwork” from Shadow of the Demon Lord . Of course, you can simply use it as a unique…
This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…
Was a bit nervous about the proximity of the AC1200 board with the solder points for the battery so designed this holder to ease my nerves.
I adjusted the Clockwork 2 extruder so that the Mellow DIY Integrated Shaft Direct Drive ISG Gear Kit is perfectly positioned. Mellow's hidden hint that something needs to be removed from the guilder helps the gears to run in principle,…
This Steampunk Mechanical Dragon blends classic dragon anatomy with intricate clockwork machinery. Featuring exposed gears, piston-driven limbs, riveted armour plating, and mechanical wing supports, this model delivers rich industrial…
A 3d printed holder for a switch to use with the Clockwork Pi u-console hackergadgets aio-v2 nvme board
Master the art of Victorian engineering with the Steampunk Dragon ! This model redefines the aesthetic by moving away from traditional hinges. Instead, it utilizes a seamless gear-mesh anatomy where interlocking brass plates slide over…
Master the art of Victorian engineering with the Steampunk Dragon ! This model redefines the aesthetic by moving away from traditional hinges. Instead, it utilizes a seamless gear-mesh anatomy where interlocking brass plates slide over…
If you downloaded the model, it means you liked it! If you like it, put a like mark!😜😜😜
If you downloaded the model, it means you liked it! If you like it, put a like mark!😜😜😜
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
This Steampunk Automaton Warrior brings mechanical ingenuity and industrial fantasy together in a striking clockwork combatant. Built from brass plates, riveted armour, and intricate mechanical parts, the automaton stands ready for battle…
This Clockwork Guardian Automaton is a powerful mechanical protector built from brass armour plates, riveted joints, and intricate clockwork engineering. Designed in a classic steampunk style, the automaton stands ready for battle while…
This Steampunk Explorer Captain is a bold adventurer from an age of brass machinery and mechanical innovation. Equipped with a detailed steampunk outfit, the captain wears a leather coat reinforced with metal plates, mechanical goggles,…
This Steampunk Alchemist Engineer blends science, invention, and mechanical craftsmanship into a striking steampunk character. Equipped with brass goggles, a mechanical backpack filled with gears, and a large wrench tool, the inventor…
This clockwork time mage figurine blends fantasy and steampunk design, featuring a robed figure surrounded by mechanical elements and precision detailing. The character stands centred among interlocking gears, holding a staff topped with…
A mix of the uConsole three antenna bracket (one piece) by dandrewe and the Hackergadgets cover for uConsole by the amazing strt_fnst I needed 5 antennas, but I don't use the antenna board from HackerGadgets, instead mine are IFX to…
TFA Clockwork "Funk-uhrwerk 60.3818.01" comes without any means to hang the clock to the wall. This part is a simple fix for that issue. Prints fast and works quite well.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 0.88mm…
A remix from the great Afterburner Galileo Clockwork /EDIT In the files you will also find a variant for assembling an original Orbiter Extruder, so you don't have to print the printed parts that depict the Orbiter, but only what is…
A Clockwork Orange Neighborhood Watch Sign Show them how you patrol your neighborhood. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
When toying around with Voron 3D Printers you usually endup having one or two spare extruders laying around in your tool drawer. This little gridfinity-bin holds your Voron Clockwork extruder firmly in place, always ready when you need…
EN Winding key for children's toy. Internal shape of the hole - square, 3mm. Print setting: 0.15mm Material: PLA Filling: 15% Collar: recommended Supports: print hot bed only (recommended but not required)…
I wanted to create a steampunky clockwork robot for use in my upcoming Shadow of the Demon Lord game. I remixed Mechatronist's floating robot with some other bits and bobs to make this wheeled variant, which I then realised looks a lot…
A centaur-shaped mechanical warrior for your TTRPG of choice. This could be a “Warforged” from Eberron , an “Anvilwrought” from Theros , or a “Clockwork” from Shadow of the Demon Lord . Of course, you can simply use it as a unique…
A Clockwork rat. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This is a keychain model based on the album cover of Clockwork Angels by the Canadian band Rush. For printing on an FDM printer, high quality print is recommended due to abundance of small details.
I was very happy with cliftoce's PUG mount for CW2 but the heatsets were pulled out when I tightened the clamp. Simple remix to move them to the back so they can't pull out. Parts are oriented for printing with no supports needed@40%…
I wanted a little ventilation for my Nitehawk-SB so I remixed the LDO CW2 cover. The cover has a complex face which makes adding a pattern tricky. Print with the standard Voron settings in ABS or ASA.
Dual gears are not the holy grail, as MirageC and MihaiDesign showed in their videos. There is always a bit of backlash and usually a single gear can provide enough torque. This is why many modern exruders are now going single gear. A…
PG9 without thread Please use two suitable M3 screws to tighten
Here is neat little clockwork Owlbear - I've attached the source files for reference and a screenshot of the before / after on my sculpting work. I really like how this one turned out. I adjusted the various bolts and added little rune…
I wanted to provide mount points for an umblical for a BigTree Tech CANBUS installation. BTT provides a cable bridge for the Clockwork 2. It was an easy matter to attach a threaded boss that would accommadate a PG7 cable gland. The cable…
First things first, the entire backplate and kickstand are my design and my original model. The antenna mounting parts are from paragonv on makerworld (License: https://creativecommons.org/licenses/by-nc-sa/4.0/ Link to his/her upload on…
This is a lightweight protective armor I designed for my Clockwork Pi uConsole. The enclosure is an exercise in adding additional durability and expansion while trying to maintain the device’s compact and portable nature. The design…
I did not find any display cover for my uConsole that I liked, so I created my own. V1 is a bit more rigid than V0, if you need that. There should be enough space to access USB interfaces with the cover on. Print it with the top side…
This is a remix of a stand designed for the Devterm handheld Linux machine by Clockworkpi. I modified the original for more reliable printing. It no longer prints the individual stand “legs" as disconnected islands with small footprints.…
I would recommend printing this with 100% infill to make it feel heavy enough (but you don't need to). Thanks for checking my model out! If you want any changes to be made, just add a comment, and I'll do my very best to make those…
It should be a quick print. I would recommend 50% infill so they feel heavy enough. (These are double sided).
Putting it at 4000% size should make it easier to work with. This model turned out really well and even looks a bit more sophisticated than the picture. It sports a faceplate now, and doesn't have any areas that look warped or imperfectly…
An air of industrial sophistication, combining geometric steampunk elements with a modern design. If you like my earrings you can visit my earrings collection
Simple adaptation to be able to reuse a Nema 17 motor with the Clockwork 2 extruder model, using the latest version of Steathburner as a base. → Use the remaining pieces from the original repository inspired by MLoeko 19/08/2025 - add…
To fit the uConsole more tightly into the Multi-Size EVA Tools Bag Hard Travel Zipper Storage Box Shockproof Outdoor Tools Bag For Earphone Storage Case Accessories (No. 3 – 20x16x6), two parts were drawn. The parts were laser cut from 10…
bust of Alexander De Large from the movie " A clockwork Orange"
This insert is designed to hold Root base game + The Clockwork expansion. There's room for cards to be sleeved (with up to 100 micron sleeves). Print one of each file except for FactionTray_x3 , you can print those each in the color of…
This is a snug-fitting cover for the picocalc that can cover the screen and keys when not in use, or be snapped into place in reverse, like a graphing calculator. Someone had already designed a cover for this thing, but it didn't snap…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I bought some cheap Chinese clockworks. Unfortunately, the came without a wall hook. So I designed this case for wall installation. Clockwork is 56 mm x 56 mm.
A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 CAN or SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. Fan cover BOM 4x M3x12 BHCS - DON’T OVER-TIGHTEN The bolts are…
Made an alternate pullback for the Thumper in the style of one of those clockwork keys that old wind up toys and clocks used to have. Uses the same bolts and nut for the threaded rod as the original Proper print orientation pictured…
Steampunk guardian bust with clockwork engravings, goggles, and mechanical plating. All one solid fused model, stable for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
I wanted a hardshell for my uConsole, I wanted a way to attach it to my person or baggage, I wanted ways to attach possible add-ons result: Picatinny-railed hardcase with Molle-compatible slits for belts. Upper part of the rail splits…
I went looking for an EBB42 mount to the back of the stealthburner, but most everything that I found would fit a obiter X.X extruder for the stealthburner. As like the rest of my designs/work that I do, it's all done in Microsoft 3D…
A 3D printable gnome tinkerer carrying a clockwork backpack that transforms into a base. The gears and pipes should be stylized but chunky, avoiding fragile thin details. The whole model should be in one piece, with an unusual…
Meowburner, the Puurrfect Stealthburner
A printable poster of the cover of Plaid's Rest Proof Clockwork You can change the filament for the different surfaces or paint them for the best contrast. Print Settings Resolution: 0.1-0.2 Infill: 100% Notes: Print with a 0.2mm nozzle…
Simple stand to display your DevTerm. Makes the display easier to read on your desktop or show off your device on a shelf. Open design allows better cooling, too! Model available on TinkerCAD: https://www.tinkercad.com/things/iB2n0KXmySi…
Nothing fancy, Just modded the door for some vents for the nitehawk SB.
Commanding and regal, The Clockwork Empress embodies the brilliance and power of steampunk ingenuity. Adorned in intricate armor, pipes, and a crown-like top hat, she stands as the queen of invention and elegance. Perfect as a centerpiece…
The minimum radius of my cable chain was too large, so at the leftmost position, my Stealthburner was pushed upward, limiting the printable area. Therefore, I modified BTT's original cable bridge and added a small 45-degree piece.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models come follow me on Patreon https://www.patreon.com/c/Adamnant for updates and exclusive minis. Here is another model from my list off of…
I made this part to fix a problem i was having, my guilder was holding the gear in place just fine, but i dont know if i had bad bearings from the formbot kit or what the reason was, but the pin holding the guidler gear in place was…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Take a peek inside the magic! This highly detailed 3D printable accessory captures a fascinating cross-section view of Santa's Clockwork Workshop (sometimes called the North Pole Bell). The intricate interior is packed with gears and…
Mark your page with this stunning black-and-white accessory featuring a wise, winged owl. The owl, detailed with clockwork mechanisms, is perched upon a swinging pendulum in a mystical cosmic setting. A fantasy castle is visible on a…
Made a cover w/ fan compatible with the FilamATrix toolhead cutter mod.
I accidentally ended up printing a newer X Carriage that replaced the HS inserts with screwholes. While I managed to get two nuts into the holes and managed to insert the left screw I failed misserably inserting the right one. Ther was…
This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…
A Clockwork Orange Bookmark. Have been printing and designing models for a couple of years and finally took the plunge and uploaded my first model to Printables, hope ya'll like it. Can be printed without AMS by Switching filaments as…
Made a small change of SB2209 anchor for clockwork2. During my assmbly I couldn't find an anchor component that fits both spring steel and an umblical. So I simply combined two I found on the website. One from the official clockwork2 stl,…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Was a bit nervous about the proximity of the AC1200 board with the solder points for the battery so designed this holder to ease my nerves.
I adjusted the Clockwork 2 extruder so that the Mellow DIY Integrated Shaft Direct Drive ISG Gear Kit is perfectly positioned. Mellow's hidden hint that something needs to be removed from the guilder helps the gears to run in principle,…
This Steampunk Mechanical Dragon blends classic dragon anatomy with intricate clockwork machinery. Featuring exposed gears, piston-driven limbs, riveted armour plating, and mechanical wing supports, this model delivers rich industrial…
A 3d printed holder for a switch to use with the Clockwork Pi u-console hackergadgets aio-v2 nvme board
Master the art of Victorian engineering with the Steampunk Dragon ! This model redefines the aesthetic by moving away from traditional hinges. Instead, it utilizes a seamless gear-mesh anatomy where interlocking brass plates slide over…
Master the art of Victorian engineering with the Steampunk Dragon ! This model redefines the aesthetic by moving away from traditional hinges. Instead, it utilizes a seamless gear-mesh anatomy where interlocking brass plates slide over…
If you downloaded the model, it means you liked it! If you like it, put a like mark!😜😜😜
If you downloaded the model, it means you liked it! If you like it, put a like mark!😜😜😜
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
This Steampunk Automaton Warrior brings mechanical ingenuity and industrial fantasy together in a striking clockwork combatant. Built from brass plates, riveted armour, and intricate mechanical parts, the automaton stands ready for battle…
This Clockwork Guardian Automaton is a powerful mechanical protector built from brass armour plates, riveted joints, and intricate clockwork engineering. Designed in a classic steampunk style, the automaton stands ready for battle while…
