FlySky FSi6x Transmitter Gimbal Guards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gimbal Guards for the FlySky FSi6X (and probably the FSI6) transmitter. V5 is my best iteration so far.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 64
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
V5 of the Gimbal Guard is the one you should be printing, I've uploaded the other versions to show the iterative process I went through.
V1 worked, but was terrible to remove, and was mainly to confirm my measurements.
V2 was nice to remove, but got in the way of the lanyard. The bar I used to connect the two sides was aesthetic but used more supports than it should and was very fragile.
V3 moved the support out of the way of lanyard and made it stronger, but now it was hard to remove again.
V4 was almost the best! I added a thumb cutout to make grabbing and pulling them off easier, but then after using them for a while I noticed that the ergonomics were just wrong.
V5 corrected the grip, and I added a fillet on the bottom opening to make it easier to locate
Print with supports.
Amazon Link for the FlySky FSi6x: https://a.co/d/0TJ3UrY