Handelbar Extender Bike
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basically a piece of plaste that you can press into the ends of your handelbars to make your bike bars wider.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
Made for bikes
This piece makes your handelbar wider, you just press it in the hole at the end of your bar and it should fit.
The Extender extend the bars by 10,20 or 30mm (as you wish) and it is made for a 22.2 mm outer diameter of the bars what is that the most bars have.
I would recommend to print with at least 8 wall lines, because of the load you can put on that extender, infill in not the most important thing here, going with 30% or more is completly fine.
And make shure you lay down the model for ptinting for optimal strenght. Not important for the Test_Extender
Of course it would be better to buy a wider handelbar but in case you somehow cant there is this possibility