Tonna 23 cm yagi antenna clamps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tonna 23 cm yagi antenna clamps 3 mm éléments 16 and 15 mm boom.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 125
- Makes
- 0
- Views
- 751
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reinforced Clamps for Tonna 23 cm (1.2 GHz) Yagi Antenna
Replacement antenna element clamps specially designed for Tonna 23 cm (1.2 GHz) Yagi antennas.
Original Tonna clamps are known to become brittle over time and break easily, and official spare parts are no longer available. This 3D printed model is a stronger, heavy-duty alternative designed to fix your antenna and ensure long-term UV and weather durability.
Technical Specifications
Element Diameter: 3 mm
Boom Sizes Supported: Fits both 15 mm and 16 mm square booms
Hardware Required: M4 screw + M4 nut
Recommended Print Settings
To ensure high mechanical strength and resistance to outdoors conditions:
Material: PETG, ABS, or ASA (Avoid PLA for outdoor use)
Infill: 100%
Perimeters / Walls: 6 wall loops
Layer Height: 0.20 mm
Support & Feedback
If this model saved your antenna, please leave a Like and share your Makes!
Feedback and suggestions for future improvements are always welcome.
Check out my profile for other radio amateur and antenna 3D models.
73 de F1NSR Yannick