1 / 4
Tonna 23 cm yagi antenna clamps — zdjęcie 1
1 / 4

Tonna 23 cm yagi antenna clamps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tonna 23 cm yagi antenna clamps 3 mm éléments 16 and 15 mm boom.

Ocena
0 / 5
Polubienia
8
Pobrania
125
Wydruki
0
Wyświetlenia
751
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Reinforced Clamps for Tonna 23 cm (1.2 GHz) Yagi Antenna

Replacement antenna element clamps specially designed for Tonna 23 cm (1.2 GHz) Yagi antennas.

Original Tonna clamps are known to become brittle over time and break easily, and official spare parts are no longer available. This 3D printed model is a stronger, heavy-duty alternative designed to fix your antenna and ensure long-term UV and weather durability.

Technical Specifications

  • Element Diameter: 3 mm

  • Boom Sizes Supported: Fits both 15 mm and 16 mm square booms

  • Hardware Required: M4 screw + M4 nut

Recommended Print Settings

To ensure high mechanical strength and resistance to outdoors conditions:

  • Material: PETG, ABS, or ASA (Avoid PLA for outdoor use)

  • Infill: 100%

  • Perimeters / Walls: 6 wall loops

  • Layer Height: 0.20 mm

Support & Feedback

  • If this model saved your antenna, please leave a Like and share your Makes!

  • Feedback and suggestions for future improvements are always welcome.

  • Check out my profile for other radio amateur and antenna 3D models.

73 de F1NSR Yannick

Tagi