1 / 4
KNOBMI! Sovol SV06 Y belt tensioning system with Knomi — image 1
1 / 4

KNOBMI! Sovol SV06 Y belt tensioning system with Knomi

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Enhance your SV06 with the KNOBMI, integrating the BTT Knomi V2 Display into the Y-belt tensioning system

Rating
0 / 5
Likes
9
Downloads
22
Makes
0
Views
348
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Later Edit 28. November 2024

modified the Knob and the Knomi holder. made them a little bit smaller in some cases the bed was heating them 

 

This mod integrates the BigTreeTech Knomi V2 Display into the Y-axis belt tensioning system of the Sovol SV06 3D printer, combining functionality and aesthetics. The display is seamlessly housed within a custom-designed tensioning knob, ensuring easy access while maintaining precise belt adjustments.

Features:

  • Integrated Display: The BTT Knomi V2 Display is centrally positioned within the Y tensioning knob.
  • Secure Mounting: Includes a custom holder for securing the antenna and display frame to the printer.

Requirements:

Hardware:

Power: Connect the display to the motherboard using 5V and GND.

Print Settings:

  • Layer Height: 0.2mm
  • Infill: 15-20%, Gyroid pattern
  • Walls:
    • Pulley holder: 5 walls
    • Other components: 3 walls
  • Top/Bottom Layers: 5 each

Notes:

The provided STL files are pre-oriented and ready for printing. Follow the picture in the repository for antenna and holder placement guidance. 

For the SV06Ace use this model
For the SV06 Plus use this model 

Tags