KNOBMI! Sovol SV06 Y belt tensioning system with Knomi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enhance your SV06 with the KNOBMI, integrating the BTT Knomi V2 Display into the Y-belt tensioning system
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Later Edit 28. November 2024
modified the Knob and the Knomi holder. made them a little bit smaller in some cases the bed was heating them
This mod integrates the BigTreeTech Knomi V2 Display into the Y-axis belt tensioning system of the Sovol SV06 3D printer, combining functionality and aesthetics. The display is seamlessly housed within a custom-designed tensioning knob, ensuring easy access while maintaining precise belt adjustments.
Features:
- Integrated Display: The BTT Knomi V2 Display is centrally positioned within the Y tensioning knob.
- Secure Mounting: Includes a custom holder for securing the antenna and display frame to the printer.
Requirements:
Hardware:
- BigTreeTech Knomi V2 Display https://s.click.aliexpress.com/e/_DdzwPbX
- 1x M4x25mm screw
- 1x M4 nut
- 2x M3x12mm screws
- 2x M3x15mm self-tapping screws
- 2x M3x4.5mm OD, 4mm long heat-set inserts
Power: Connect the display to the motherboard using 5V and GND.
Print Settings:
- Layer Height: 0.2mm
- Infill: 15-20%, Gyroid pattern
- Walls:
- Pulley holder: 5 walls
- Other components: 3 walls
- Top/Bottom Layers: 5 each
Notes:
The provided STL files are pre-oriented and ready for printing. Follow the picture in the repository for antenna and holder placement guidance.
For the SV06Ace use this model
For the SV06 Plus use this model