1 / 4
Ender 3 Pro Rear Extended Case for SKR mini 2.0 and Raspberry Pi — image 1
1 / 4

Ender 3 Pro Rear Extended Case for SKR mini 2.0 and Raspberry Pi

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a rear mount Ender 3 Pro case to house a SKR Mini 2.0 and Raspberry Pi

Rating
5 / 5
Likes
42
Downloads
188
Makes
1
Views
2,001
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This is a remix of a remix of a Ender 3 Pro Case from Thingiverse that in turn is a remix of this case.  I redesigned it to better fit my SKR mini 2.0 and a Raspberry Pi 3 or 4.  I originally had some Pi version specific holes but opted to remove them so you could upgrade later on if desired.

I recently sold my Ender 3 Pro to make room for another Prusa so I won't be making any updates or changes but I've included the Fusion360 files.  

This remix allows for the following

  • 1 - SKR mini 2.0
  • 1 - Raspberry Pi 3 or 4
  • 2 - 40x10mm Fan (Noctua 5v)
  • 4 – LM2596 Buck converters 
  • Requires printer to be raised slightly (I used the feet from the original print - included here)
  • Supports the use of this cable chain. (Ender 3 Cable Chain)
  • 4- M3x6 screws to secure the lids. No heated inserts needed, just let the screws cut into the plastic.
  • 4 - M5-6mm bolts to secure to the frame
  • 4 - M2.5 screws to mount Raspberry pi
  • M3x6mm bolts to mount bucks and SKR mini 2
  • 2 - M3x10mm screws to mount each fan

Note: You may notice in some of the pictures how the Pi got moved around during some revisions but the pi is to the right of the fan to allow for more room to power the pi using the usb port.  I don't own the Ender any longer but I wanted to share the design in case someone else found it useful.

===

Print Settings

  • .4 Nozzle
  • Printed in PETG
  • Requires supports on the side rails only

Tags