1 / 2
Brother Tray Handle Reinforcement HL-3170CDW, MFC-9330CDW, MFC-9340CDW — image 1
1 / 2

Brother Tray Handle Reinforcement HL-3170CDW, MFC-9330CDW, MFC-9340CDW

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Brother Tray Handle Reinforcement HL-3170CDW, MFC-9330CDW, MFC-9340CDW

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
52
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

I had a heavily used printer tray and the area above the handle started to break.  Created this model after attempts to super glue failed to keep it together.

Back part is used for drilling guide. There are 2 models Back which is 94mm which is what I measured, and BackTight which is 94.5mm which is tight enough to hold it place.

Parts required:

2 x M3 nuts/nylocks

2 x M3 screws 12 or 16mm

2 x M3 washers (optional)

Mine were printed in a silk black PLA using Voron print specifications. 

Instructions:

-Choose your back model (I used the BackTight model) to wedge the part as tight as possible to edges

-drill the holes through the original part using the Back part as a guide. 3-3.2mm drill is best option.

-remove Back printed part and drill the hole to 3.2-3.5mm to help with fit.

-test fit both the front and back with screws and bolts. 

-if everything fits tighten it all down.  I did have one nylock that spun in the recess, drop of glue could be used if regular nuts are being used.

**Optional epoxy or glue could be used in between the parts, but this could discolor or leave white marks.    I found it held in place with the screws and nuts

**This may work with other Brother Trays if people confirm, or I come across I'll add them to description.

Tags