[OUTDATED] Thinner Thumper Blocks Filament Path with Pre-Gate Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As the title suggests :)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not recommended to use - Thumper Blocks' filament path proven to be extremely fragile and it breaks during installation of the ECAS fitting, and same goes for this remix.
This is a (work-in-progress) modified version of a Thinner Thumper Block rev3 for a 9-channel ERCF v2. The modification is a filament sensor that is built directly into the channel. It calls for a 4mm bearing ball and the same D2F-01FL sensor as in https://www.printables.com/model/651002-k1-extruder-filament-runout-sensor .
TIP: you can install the swing lever onto your pre-soldered microswitches that came with the kit - that would be much easier than re-soldering the whole set.