Skeleton Track - Straight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stripped down tracks in different lengths compatible with Ikea/Brio. Saves filament and is still strong.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 142
- Makes
- 2
- Views
- 302
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
I always felt like most train tracks out there waste too much filament without any benefit. So I designed my own.
Even with just 2 wall loops and 15% infill they are quite strong. If you want to make them really strong, just use 3 wall loops and more infill.
I plan to add other tracks (corners, switches, bridges, ramps, …) soon.
My settings:
| Nozzle | 0.4 mm |
| Material | PLA Matte (Bambulab) |
| Layer Height | 0.2 mm |
| Wall Loops | 2 |
| Infill | 15% |
| Top Surface Pattern | Concentric |
I have added the most common sizes (in our collection at least) as STLs:
- 60 mm
- 105 mm
- 145 mm
- 215 mm
There is also one 3mf with one of each track. I might add the parameterized model at some point (it's not cleaned up yet).