Helper Disc Tabs for Improving Bed Adhesion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These helper discs greatly increase bed adhesion of small parts or lifting corners.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I've had many failed prints due to a single part coming off during a large multi-part print. It's taken me too long to realize that there is a very simple solution to many of these bed adhesion problems if you just add these helper discs from the Add Shapes>Gallery. I wanted a better disc with a smaller tear-off and something easier to place than the stock disc in the Gallery (PrusaSlicer), so I just made the one I imagined.
I included a thin one (.2mm) and a thicker one with thin break-off tab. The thicker one is easier to remove from the bed if you actually have good bed adhesion. The thinner one is obviously a tiny bit faster to print.
Watch the tutorial for the easiest way to integrate these into your prints.