Helper Disc Tabs for Improving Bed Adhesion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These helper discs greatly increase bed adhesion of small parts or lifting corners.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I've had many failed prints due to a single part coming off during a large multi-part print. It's taken me too long to realize that there is a very simple solution to many of these bed adhesion problems if you just add these helper discs from the Add Shapes>Gallery. I wanted a better disc with a smaller tear-off and something easier to place than the stock disc in the Gallery (PrusaSlicer), so I just made the one I imagined.
I included a thin one (.2mm) and a thicker one with thin break-off tab. The thicker one is easier to remove from the bed if you actually have good bed adhesion. The thinner one is obviously a tiny bit faster to print.
Watch the tutorial for the easiest way to integrate these into your prints.