Apollo MSR-1 Case with GPIO cutouts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modified case for the Apollo MSR-1 sensor from Apollo Automation to support adding leads to the GPIO pads
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified case for the Apollo MSR-1 mmWave radar sensor from Apollo Automation. The MSR-1's pcb has solder pads for 5v, 3.3v, ground and GPIO/I2C, for great extensibility. But you can't easily solder leads to the pads with the existing case.
This mod provides a cutout in the main case for soldered leads to exit the PCB/case; as well as a modified backplate that is high enough to slide past soldered leads to open/close the case.
Printed on a BambuLab A1-Mini in PLA. I recommend a brim for the case to increase the adhesion to the bed.
The original MSR-1 STL files can be found at Apollo Automation's github/discord.