1 / 1
Shelf Brackets for 1" Boards (1" x 4", 1" x 6", or 1" x 8") — image 1

Shelf Brackets for 1" Boards (1" x 4", 1" x 6", or 1" x 8")

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These low profile brackets are designed to hold a 1" board to form a simple shelf for plants and other decor.

Rating
0 / 5
Likes
17
Downloads
48
Makes
0
Views
161
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial — Share Alike

These low profile brackets are designed to hold a 1" board to form a simple shelf for plants and other decor.

There are two variants.   You may mix and match both types for your shelving needs.

  • Friction Fit:
    • Relies only on friction to hold the board in place
    • Attaches to the wall with a #7 or #8 screw (and washer).
  • Friction Fit with Screw Reinforcement
    • In addition to friction, utilizes a #7 or #8 screw (and washer) to keep the board from being dislodged from the bracket.   
      • TIP: Make sure that this screw does not exceed 1-¼" (32mm) in length.
    • Attaches to the wall with a #7 or #8 screw (and washer).

For mounting the brackets to the wall I would suggest these Stud Solver anchors which can hold up to 50lbs (22kg) each.

IMPORTANT: Before you contact me complaining that the bracket openings are not 1" (25.4mm) tall, please take a moment to view this helpful video that explains board sizing.


Print Settings:

  • Material: PLA Pro or PC
  • Walls: 5
  • Top & Bottom Layers: 5
  • Infill: 15 - 20%.



NOTICE: If you post remixes online --- Printables, Thingiverse, Cults, etc. -- you must include attribution and link back to this original design. Do not claim the original design as your own.
 

Tags