1 / 1
Shelf Brackets for 1" Boards (1" x 4", 1" x 6", or 1" x 8") — zdjęcie 1

Shelf Brackets for 1" Boards (1" x 4", 1" x 6", or 1" x 8")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These low profile brackets are designed to hold a 1" board to form a simple shelf for plants and other decor.

Ocena
0 / 5
Polubienia
17
Pobrania
48
Wydruki
0
Wyświetlenia
161
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These low profile brackets are designed to hold a 1" board to form a simple shelf for plants and other decor.

There are two variants.   You may mix and match both types for your shelving needs.

  • Friction Fit:
    • Relies only on friction to hold the board in place
    • Attaches to the wall with a #7 or #8 screw (and washer).
  • Friction Fit with Screw Reinforcement
    • In addition to friction, utilizes a #7 or #8 screw (and washer) to keep the board from being dislodged from the bracket.   
      • TIP: Make sure that this screw does not exceed 1-¼" (32mm) in length.
    • Attaches to the wall with a #7 or #8 screw (and washer).

For mounting the brackets to the wall I would suggest these Stud Solver anchors which can hold up to 50lbs (22kg) each.

IMPORTANT: Before you contact me complaining that the bracket openings are not 1" (25.4mm) tall, please take a moment to view this helpful video that explains board sizing.


Print Settings:

  • Material: PLA Pro or PC
  • Walls: 5
  • Top & Bottom Layers: 5
  • Infill: 15 - 20%.



NOTICE: If you post remixes online --- Printables, Thingiverse, Cults, etc. -- you must include attribution and link back to this original design. Do not claim the original design as your own.
 

Tagi