PCIe NVME Card stand for cMP 4,1/5,1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
cMP 4,1/5,1 PCIe card holder for riser cable setup
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
As my cMP 4,1/5,1 2nd PCIe 16x slot is partly blocked by a 2,5 slot height PC GPU, I needed to come up with a solution.
I use a normal PCIe riser cable to connect to the slot but needed a place to put the NVMe card. Hence I created a holder / stand for the OWC 1M2 that fits snuggly into the blocks. The complete stand is mounted on the CPU tray chassis with 3M strong double sided tape. YMMV
I printed mine with Durapro ASA 0,2mm layer height and 0,4mm nozzle on a Bamboo Lab P1S using the ‘optimal’ profile. As long as your setup and material allow layers which stick together and not separate on first touch, I don't expect material and print settings to matter much.