Counting matching models…
Note, I posted this on Thingiverse as a remix here: https://www.thingiverse.com/thing:5438660 but had a problem associating it with my list of account models there so I moved it to Printables. -- Remixed only from the OBJ files posted by…
The CMPSR is an open source 3D printed folding shoulder for violin. This prints with minimal supports, and the areas which do require supports are covered by the foam pad. This fits a standard full size violin. Materials (4) M5x10mm bolts…
Printed vertically with the fan side facing down, with supports to support the part that mounts the shroud to the card. M3x10 screws used. First plug in the EPS to 2x PCIE cable then mount the shroud and screw it in using the 2 screws and…
Made a nice organic looking air intake to cool four Nvidia CMP 170HX PCIe cards with two high pressure 120mm fans. They move more air than 8x 40mm fans and are hell of a lot quieter. Also compatible with the A100 PCIe and potentially…
120mm fan duct for NVIDIA A100 / CHMP 170HX GPUs. It's not a very efficient design, but it's enough to cool a CMP 170HX with a 120mm Noctua industrial 3000RPM fan. .STL file is included Printing: Orientation: Large Flange on bed Material:…
I printed Gomiappuroda's blower adapter (https://www.thingiverse.com/thing:6773548), with the end chopped off when slicing to save space, then used this piece to mount the blower next to the card so it fits in my case. Two versions, one…
EN This link combine a Cube Acid PRO-E 60 CMPT X-Connect light with the FPILink universal adapter. It allows you to use the cheaper Cube Led light with the universal mount. You will need a cylindric screw DIN 912 - M5x22, M5 washer and a…
https://github.com/dkpoulsen/170hx-fanduct
I couldn't find a fan shroud for specifically the CMP100HX-210. The ones for the v100 didn't work for this, despite what's said online. I made this for 2 40mm fans and M3 screws screwed into the plastic. I couldn't be bothered to add…
My take on the Beltstrom CMP-60 from Deep Rock Galactic: Rogue Core! The magazine is removable, so I'd recommend printing two. Some parts may require small amounts of superglue or a mallet to get them properly in place. Everything…
FPV plate for interna installation within the 2.3 meter Hobbyking or CMpro J3 Cub Category: 3D Printing
As my cMP 4,1/5,1 2nd PCIe 16x slot is partly blocked by a 2,5 slot height PC GPU, I needed to come up with a solution. I use a normal PCIe riser cable to connect to the slot but needed a place to put the NVMe card. Hence I created a…
This will allow dumping one side at a time on the 37 gallon Canadian made composter. Printed with PETG. Includes on plus (add) cover and one timed (clock) panel. This is a great 2 sided tumbling composter other than this shortcoming. Best…
This is a 3D-printable replacement clip for the Entel CMP750. It works with the original pin and springs. Alternatively, the pin can be replaced with an M2 screw and nut. Orient the top and bottom parts on their sides and use supports.…
Simple hook that attaches to the backside of the CMP051 cable management tray from flexispot. The fit is designed for the outer slots, where the hooks nicely lock in place. I sticked to PLA with standard settings (0.2mm layer height and…
PLA friction fit CMP 170HX adapter for a 9733 BFB1012VH-F00 centrifugal fan with a 58mm width, 34mm height, and 10mm depth outlet dimension with no screw retention security because I have no screws. Made with 100% ignorance and 0% 3d…
The CMP 170HX has a bunch of fins at the front that seem to serve basically no purpose(except mayber to stop you from sticking your fingers inside the shroud). The glued in fins were an obstruction for a cooling idea I had, so I made this…
The original mount for an RFR CMPTwl, modified slightly to reduce strain to the part that attaches to the upper mount
Držák pro zavěšení na zeď plotostřihu DeWALT DCMPH566. Funkční doplněk pro pořádek v garáži. PLA výplň 35%
